TROUBLESHOOTING

Possible Issue: Power Supply Problems

• Check LED Controller. Is the Status LED on?

• Is the power adapter on? Check wiring at the operator’s power source. Trace wire from LED Controller.

• Check Press-on Headers. Are the wires well-secured? Are they pressed in vertically all the way? Screws facing outwards? Match wire colors with the words on the LED Controller’s cover.

• Ensure the external connector mating the LED Harness Cable to

the LED Strip is fully connected. Check pins inside the connector.

Possible Issue: Signal Wire Problems

• Signal wiring is disconnected.

• Use a multimeter to determine what type of signals exist for fully-open and fully-closed. Use the Wiring Guide insert to determine which profile you should be using.

• Check if the LED Controller is properly grounded to the same Common in use by the Operator.

• Potential programming issue with LED Controller.

REMINDER: If installing on an A/C system, the LED Controller must use an A/C Signal Converter Board.